22lr magazine designs available, and so this file is to allow you to check it will fit your rifle before you get too. The slicer settings for Pilot Geeks Maverick v2. I have fully 3d printable 10 and 20 round. Suggested 3D Print Maverick 22 Revolver Settings All of the materials can be found at a hardware store and modified using Pilot Geek’s documentation. in the 3d printing software, part may show up as incorrect scale. before saving, go to options and set resolution to high. to save as an STL, then go to 3d print > print > save copy as STL. You will need the following hardware for the PG22. stl format for 3d printing, open up the part and then go to environments > 3d print > begin 3d print (additive). Required Parts for the Pilot Geek’s Maverick Revolver Prerequisites 22 shorts because they are easier to load and eject, and more powerful bullets tend to get stuck. The PG22 has a safety feature that prevents accidental firing, and it can be manually decocked. It has been improved from the original version by changing the grip and adding a feature that allows the cylinder to rotate automatically when the gun is cocked. The PG22 Maverick V2 is a small gun that shoots small bullets called.
